|
|
|
| |
|
|
| |
|
|
|
|
|
| |
 |
|
- Two (2) FC-4G host channels; transfer rate up to 400MBps per channel
- Accommodates sixteen the latest 3Gbps, SATA-II (3Gbps) disk drives
- ASIC400 architecture that supports hardware RAID 5 and RAID 6 engine
- Market leading I/O performance
- Sustained RAID5 Read/Write at 658/460 MB/sec.
- Sustained RAID6 Read/Write at 651/411 MB/sec.
- Embedded RAIDWatch software for effortless RAID management
- Windows Server 2003 certified
- SANWatch ® storage management software
|
|
|
| |
| |
|
|
|
|
|
| |
P1204 |
Single controller |
2U/12-Bay |
|
P804 |
Single controller |
2U/8-Bay |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
- Multiple arrays configurable with dedicated or global hot spares
- RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, and NRAID
-
Online expansion by:
- Adding new drives
- Copying and replacing drives with drives of larger capacity
- Automatic background rebuilds. Independent array stripe size and write policy Intelligent drive handling:
- Degraded mode: skips irreparable blocks to continue rebuild
- Normal: data-block verification and repair
|
|
| |
|
|
|
|
| |
- Single controller configuration provides full RAID functionalities
- One (1) EonStor enhanced 2U enclosure
- One (1) RAID controller module
- One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
- Two (2), hot-swappable, redundant, 350W power supply units
- Three (A12F) or Two (A08F), hot-swappable, redundant, single-fan cooling modules running in high/low speeds
- Twelve (12) or eight (8), hot-swappable drive trays
- Two (2) front handles
- Optional battery backup unit
|
|
| |
|
|
|
|
| |
- Two (2) FC-4G through two (2) SFP host ports
- Concurrent I/O commands
- Tagged command queuing up to 256
- Variable stripe size per logical drive
- Optimization setting for random or sequential I/Os
|
|
| |
|
|
|
|
| |
- Twelve (12) or eight (8) 3Gbps SATA-II (3Gbps) , hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA-I or SATA-II (3Gbps) disk drives
- Automatic bad-sector reassignment
- Dedicated bandwidth to each connected drive
|
|
| |
|
|
|
|
| |
-
Front LCD control panel for setup and configuration10/100 BaseT Ethernet for out-of-band managementOne (1) RS-232C serial port for local access to firmware-embedded utility Firmware-embedded Java-based RAIDWatch® GUI manager:
- VT-100 terminal emulation via RS-232C
- Telnet access via onboard Ethernet port
- Cross-platform, remote administration with SSL
- Out-of-band access via Ethernet
- Centralized management to monitor and administer multiple RAID units on one screen
Configuration client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger,SMS short messages, and the configuration utility screen
|
|
| |
|
|
|
|
|
| |
- SNMP trap event notification with plain-text event message (no MIB file required)
- SNMP V2.0 MIB file support with get-and-set commands
|
|
| |
|
|
|
|
|
| |
- Onboard alarm is triggered when one of the following modules fails:
- RAID controller module
- Cooling module
|
|
| |
|
| |
- Two (2) per drive tray
- One (1) per cooling module
- One (1) per power supply unit
- One (1) per BBU module
- Three (3) per LCD panel
- Five (5) per RAID controller module
- Two (2) per Ethernet port
- Module failure alert through I 2 C bus
|
|
| |
|
| |
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware' s Adaptive Write Policy and Guaranteed Latency I/O algorithms improve write
performance and ensure fast and continuous data flow. |
|
| |
|
|
| |
The Task Scheduler is combined with Media Scan so that the scanning operation can be scheduled beginning at a specified start time and repeating at the configurable intervals. The operation is thus hands free. Each such schedule can be defined to operate on individual hard drives, all drives of a certain class, all member drives of a specified logical drive, or all member drives of all logical drives. |
|
| |
|
| |
|
| |
- Two (2) SFP ports for host connections
- One (1) COM port (38400, n, 8, 1)
- One (1) 10/100BaseT Ethernet port
|
|
| |
|
| |
Power Supply Module Two (2) redundant hot-swappable power supplies with PFC |
|
| |
100VAC at 6A, 240VAC at 3A with PFC (auto-switching) |
47 to 63Hz |
(Maximum output: 350 Watts) |
+12.0V |
25A max. |
+ 5.0V |
25A max. |
| + 3.3V |
20A max. |
|
|
| |
|
| |
Three (P1204) or two (P804) redundant single-fan cooling modules |
|
| |
|
High speed: 31.8 CFM
Low speed: 20.1 CFM |
|
|
| |
|
| |
Operating: 0º to 40ºC (32º F to 104º F)
Non-operating: - 40º to 60ºC (-40º F to 149º F) |
5 ~ 95%, non-condensing |
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft |
|
|
| |
|
| |
- Chassis without handles: 446(W) x 88(H) x 490(D) mm
- Chassis with handles: 482 (W) x 88(H) x 505(D) mm
- Package: 381H x567W x 772D mm
|
|
| |
|
| |
- Net weight: 23.5kg
- Gross weight: 25kg
|
|
| |
 |
|
| |
Return to Top |
|
| |
|
|
|
|
|
