|
|
|
| |
|
|
| |
|
|
|
|
|
| |
 |
|
- Two (2) FC-4G host channels; transfer rate up to 400MBps per channel
- Accommodates sixteen the latest 3Gbps, SATA-II (3Gbps) disk drives
- ASIC400 architecture that supports hardware RAID 5 and RAID 6 engine
- Market leading I/O performance
- Sustained RAID5 Read/Write at 658/460 MB/sec.
- Sustained RAID6 Read/Write at 651/411 MB/sec.
- Embedded RAIDWatch software for effortless RAID management
- Windows Server 2003 certified
- SANWatch ® storage management software
|
 |
|
 |
| |
|
|
|
|
|
| |
FC-4G x 8 |
SATA-II (3Gbps) |
P1604 |
3U Rackmount |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
- Multiple arrays configurable with dedicated or global hot spares
- RAID levels supported: RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
- Online expansion by:
- Adding new drives
- Copying and replacing drives with drives of larger capacity
- Automatic background rebuilds
- Configurable stripe size and write policy per array
- Intelligent drive handling:
- In degraded mode: skips irreparable blocks to continue rebuild
- In normal operation: data-block verification and repair
|
|
| |
|
|
|
|
| |
- Single controller configuration provides full RAID functionalities
- One (1) EonStor enhanced 3U enclosure
- One (1) RAID controller module
- One (1) 256MB DDR RAM DIMM module (pre-installed on the controller modules)
- Two (2) hot-swappable, redundant, 530W power supply units (PSUs)
- Two (2) redundant, dual-fan cooling modules running in high/low speeds
- One (1) optional BBU
- Sixteen (16) hot-swappable drive trays
- Two (2) front handles
|
|
| |
|
|
|
|
| |
- Two (2) FC-4G host channels; backward compatible with 1 or 2G-FC
- Auto-negotiate FC-AL, point-to-point, or switched fabric
- Concurrent I/O commands
- Tagged command queuing up to 256
- Variable stripe size per logical drive
- Optimization setting for random or sequential I/Os
|
|
| |
|
|
|
|
| |
- Sixteen (16) hot-swappable 3Gbps SATA-II (3Gbps) drive trays that accommodate 1-inch pitch, 3.5-inch SATA-II (3Gbps) or SATA-I disk drives
- Automatic bad-sector reassignment
- Dedicated bandwidth to each connected drive
|
|
| |
|
|
|
|
| |
- Firmware-embedded utility via LCD keypad or RS-232C port
- Host-side SES emulation with pass-through to back-end SES emulation
- VT-100 terminal emulation via RS-232C
- Telnet access via onboard Ethernet port
- 10/100 BaseT Ethernet for out-of-band management
- Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
- Firmware-embedded Java-based RAIDWatch® manager:
- Graphical user interface
- Local/remote management; in-band or out-of-band via TCP/IP
- Centralized management to monitor and administer multiple RAID units on one screen
- Secure link over SSL
- Configuration Client for easy access to the configuration utility screen
- SNMP 2.0 MIBs with get and set commands
|
|
| |
|
|
|
|
|
| |
Up to 1024 LUNs (if sufficiently large memory is used with the proper settings) |
|
| |
|
|
|
|
|
| |
- Onboard alarm
- Module status LED indicators:
- Three (3) per LCD panel
- Seven (7) per RAID controller module
- Two (2) per Ethernet port
- Two (2) per cooling module
- One (1) per power supply unit
- One (1) per BBU module
- Two (2) per FC port
- Module failure alert through I2C bus
- Event notifications sent over email, fax, LAN broadcast, SNMP traps, MSN messenger, SMS short messages
- System alerts through Java-based RAIDWatch manager
|
|
| |
|
| |
Derived from a decade of experience in RAID storage design, Infortrend's innovative firmware delivers Smart technologies that provide enhanced storage solutions for every customer environment, from small organizations to large enterprises. These technologies enhance I/O processing, drive handling, and system management. |
|
| |
|
| |
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware' s Adaptive Write Policy and Guaranteed Latency I/O algorithms improve write
performance and ensure fast and continuous data flow. |
|
| |
|
|
| |
The DrvSmart utilities manage disk drive defects and help ensure data integrity. One of the main DrvSmart
functions, Media Scan, retrieves data from degraded or damaged hard drives and handles low quality drives in both the degraded mode and during the rebuild process. Other DrvSmart features include disk cloning, drive roaming, SMART, transparent resetting of non-responsive hard drives, RAID parity update tracking and recovery. |
|
| |
|
|
| |
SysSmart combines enclosure monitoring and firmware management capabilities in order to minimize the chance of down time caused by hardware failures. The SysSmart functions include the event-triggered cache flush and the various monitoring approaches combined with the powerful RAIDWatch manager. Component status, voltage and temperature readings, and system events are instantly revealed through the manager's graphical interface. |
|
| |
|
| |
|
| |
- Two (2) FC ports, each using a short-wavelength adapter
- Two (2) COM ports on the controller module for RS-232C serial port (38400, n, 8, 1) and UPS support
- One (1) 10/100BaseT Ethernet port on the controller module
|
|
| |
|
| |
Two (2) redundant, hot-swappable power supplies with PFC |
|
| |
100~240VAC with 530W PFC (auto-switching) |
47 to 63Hz |
(Maximum output: 530 Watts) |
+12.0V |
30A max. |
+ 5.0V |
32A max. |
| + 3.3V |
32A max. |
|
|
| |
|
| |
Two (2) redundant, dual-fan cooling modules |
|
| |
|
High speed: 31.8 DFM
Low speed: 20.1 CFM |
|
|
| |
|
| |
Operating: 0º to 40ºC
0º to 35ºC (with BBU)
Non-operating: - 40º to 60ºC |
Operating: 10% to 80% (non condensing)
Non-operating: 10 to 95% (non condensing) |
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft |
|
|
| |
|
| |
- Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
- Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.9 inches)
- Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches)
|
|
| |
|
| |
- Net weight: 28.5kg (62.7 pounds)
- Gross weight: 30.5kg (67.1)
|
|
| |
 |
|
| |
Return to Top |
|
| |
|
|
|
|
|
